Electrician in Metzger, OR
Metzger's Older Homes Need Electrical Work Built for Their Reality
Hear from Our Customers
Residential Electrician Metzger, OR
Most of Metzger’s residential streets are lined with homes built between the 1940s and 1990s. That’s not a problem on its own—but it does mean a lot of these homes are running electrical systems that were never designed for a modern household. Add an EV charger, a heat pump, or a new appliance, and a panel that was already near capacity becomes a real issue.
When you get the electrical work done properly—permitted, inspected, and backed by a real warranty—that pressure goes away. For Metzger homeowners specifically, the stakes are higher than average. With median home values above $730,000, your home is a significant asset. Electrical problems that go unaddressed—aluminum branch wiring that’s been quietly degrading, a panel that trips under load, outlets that don’t meet current code—aren’t just inconveniences. They can affect your insurance coverage, complicate a future sale, and in serious cases, create safety risks that a home inspector will flag immediately.
What good electrical work actually delivers is confidence. You know the panel can handle what you’re running. You know the wiring was done to code and inspected. You know if something goes wrong with the labor in the next five years, someone will come back and fix it. That’s the difference between work that was just completed and work that was done right.
Ready to get started?
Licensed Electrician Metzger, Oregon
Young Electric LLC is a second-generation, veteran-owned electrical contractor based in the Portland Metro area. Jeremy Young grew up in an electrical family and has been doing this work for over 20 years. We’ve been serving homeowners and businesses across the Metro since 2007—and we hold an active Oregon CCB license (#178887), a Building Codes Division electrical contractor license, a $20,000 surety bond, and general liability insurance. Zero complaints on file with the Oregon CCB.
Metzger sits right in the heart of the area we know well—between Tigard and Beaverton, directly off the Greenburg Road corridor, in a community where the housing stock tells a very specific story. We’ve worked through homes from exactly this era across Washington County, and we understand what those jobs typically involve before we even walk in the door.
With over 1,400 Google reviews at 4.8 out of 5 stars, our track record speaks for itself. But what keeps customers coming back is simpler than that—we answer the phone, show up on time, explain what we’re doing in plain language, and stand behind the work with a five-year labor warranty.
Electrical Contractor Metzger, OR
It starts with a phone call. Jeremy Young or someone on our team picks up—not a voicemail, not a call center. You describe what you’re dealing with, and we’ll tell you honestly whether it’s something straightforward or something that warrants a closer look. From there, we schedule a time to come out and assess the job in person.
Once we’ve seen the work, you get a clear written estimate before anything starts. No verbal ballpark figures, no surprises when the invoice arrives. For most jobs in Metzger—whether it’s a panel upgrade, an EV charger install, or wiring for a new circuit—we also handle the permit through Washington County Building Services. Because Metzger is unincorporated, permits and inspections go through Washington County in Hillsboro, not a city building department. A lot of homeowners don’t realize that until they’re already in the middle of a project. We navigate that process routinely, including Washington County’s updated online BDAS permitting portal that launched in January 2025.
The work gets done, the inspection gets scheduled, and the job gets properly closed out. Then the five-year labor warranty kicks in. If something goes wrong with the workmanship—not just a part, but the actual labor—we come back and make it right. That’s the end of the process, and it’s also the beginning of the warranty period.
Electrical Services Metzger, Oregon
The most common calls we get from Metzger and the surrounding Washington County area fall into a few clear categories. Panel upgrades are at the top of the list—and for good reason. Homes built in the 1970s in this area often still have the original 100-amp or smaller panels, some with Federal Pacific breakers that home inspectors flag routinely. When you’re adding an EV charger or a heat pump to a panel that’s already running near its limit, an upgrade isn’t optional—it’s the only safe path forward.
EV charger installation is the other high-demand service right now. Washington County’s professional household demographic is adopting EVs faster than most of Oregon, and a Level 2 charger requires a dedicated 240-volt circuit. We install the charger and handle any panel work needed to support it—one contractor, one job, one estimate. We’re also a Tesla Powerwall certified installer, which matters if you’re planning to pair battery storage with solar or a home charging setup.
Beyond those two, we handle whole-home rewiring, lighting upgrades, smart home wiring, hot tub and generator installation, security systems, and commercial electrical work for small businesses in the Washington Square corridor and surrounding Tigard area. Every job—residential or commercial—comes with a free estimate upfront and the same five-year labor warranty on all installations.
Who handles electrical permits for homes in Metzger, Oregon?
Because Metzger is an unincorporated community in Washington County, electrical permits and inspections don’t go through a city building department—they go through Washington County Building Services, located at 155 N First Ave in Hillsboro. This surprises a lot of Metzger homeowners who assume they’d call Tigard or Portland for permit questions. The process is different from what you’d deal with in an incorporated city, and if you’re not familiar with it, it’s easy to go to the wrong office or submit the wrong application type.
We handle this on your behalf. We pull the permit, coordinate the inspection, and make sure the job is properly closed out through Washington County’s system—including the county’s new online BDAS portal that launched in January 2025. You don’t have to figure out which office to contact or what forms to file. That’s part of the job.
My Metzger home was built in the 1970s—do I need to worry about aluminum wiring?
Possibly, yes—and it’s worth finding out. Homes built in Metzger between roughly 1965 and 1973 were frequently wired with aluminum branch wiring, which was the standard for residential construction during that period. The problem with aluminum wiring isn’t that it fails immediately—it’s that aluminum expands and contracts at a different rate than copper, which causes connections at outlets and switches to loosen over time. That loosening creates heat buildup, and heat buildup in a wall is a fire risk.
If your home was built during that window and you’ve never had the wiring assessed, it’s worth scheduling an inspection. The fix ranges from aluminum remediation at the connection points to a full rewire, depending on the condition of what’s already there. We’ve worked through homes from exactly this era across the Portland Metro and Washington County area, so we know what to look for and what the realistic options are. A free estimate starts that conversation without any commitment on your part.
How much does a panel upgrade typically cost in the Portland Metro area?
In the Portland area, most homeowners pay somewhere between $2,500 and $5,500 for a full panel upgrade, depending on the size of the service, the condition of the existing panel, and whether any additional work is needed to bring the system up to current code. The wide range exists because no two jobs are identical—a straightforward swap on a newer home is a different project than replacing a Federal Pacific panel in a 1975 Metzger ranch house where the wiring also needs attention.
What we won’t do is give you a low number to get the job and then adjust it upward once we’re on site. The estimate you get before the work starts is the number you can plan around. If anything changes during the job that affects the cost, we’ll tell you before proceeding—not after. For Metzger homeowners considering a panel upgrade alongside an EV charger install, bundling both into one project is often more cost-effective than scheduling them separately.
How long does a Level 2 EV charger installation take in Washington County?
For a straightforward Level 2 charger installation—where your existing panel has capacity and the charger location is close to the panel—the installation itself typically takes three to five hours. The bigger variable in Washington County is the permit. Because Metzger falls under Washington County Building Services rather than a city permit office, the timeline depends on the county’s current workload and inspection schedule. We handle the permit application through Washington County’s BDAS portal and coordinate the inspection, so you’re not managing that process yourself.
If your panel needs to be upgraded before the charger can be installed safely—which is common in Metzger’s older housing stock—that adds time and cost to the project. We’ll assess your current panel during the estimate visit and tell you upfront whether an upgrade is needed. Oregon ranks 16th in the country for EV growth over the past decade, and demand for charger installations in Washington County is high right now, so scheduling ahead is worth doing rather than waiting until you’ve already bought the car.
What does Young Electric's five-year labor warranty actually cover?
The five-year labor warranty covers the workmanship on all installations—meaning if something goes wrong with how the work was done, we come back and fix it at no charge. It’s separate from equipment warranties, which cover the breakers, panels, or other hardware through the manufacturer. So if a breaker fails because it was defective, that’s a manufacturer warranty issue. If a connection fails because of how it was installed, that’s covered by our labor warranty.
Most electricians in the Tigard and Metzger market offer a one-year labor warranty or nothing at all. Five years is genuinely uncommon in this area, and for a homeowner in a property worth $730,000 or more, that extended coverage matters. It means the contractor is confident enough in their work to stand behind it for five years—and that if something does go wrong, you’re not left trying to track down someone who’s moved on to the next job. Young Electric has been operating in the Portland Metro since 2007, so we’ll still be here if you need us.
Does Young Electric handle commercial electrical work near the Washington Square area?
Yes. We serve small businesses and commercial properties throughout the Portland Metro, including the Washington Square corridor and surrounding Tigard commercial district. The services most commonly requested in that area include tenant improvement electrical work, lighting retrofits and upgrades, service panel upgrades, and security and CCTV system installation. If you’re a business owner or property manager dealing with a space that needs electrical work—whether it’s a new tenant build-out, an aging lighting system, or a service upgrade to handle increased load—we handle that work with the same licensed, permitted, and warranted approach we bring to residential jobs.
For commercial clients, we can provide a certificate of insurance on request, which is a standard requirement for property managers and commercial landlords before authorizing work on their buildings. We have experience with the range of commercial electrical needs that come up in a dense retail and mixed-use corridor like the one directly adjacent to Metzger, and we approach commercial work with the same straightforward communication and upfront pricing we use on residential projects.
Local Resources
Useful Links