Working Hours 7:00am - 5:00pm

Serving the Portland Metro & Central Oregon

EV Charger Installation in Wilsonville, OR

Wilsonville Commuters Deserve a Full Battery Every Morning

Southbound I-5 near Wilsonville Road is already a grind — don’t make it worse by starting the day with a half-charged car. We install Level 2 EV chargers for Wilsonville homeowners who need home charging that actually keeps up with their life.

Hear from Our Customers

Level 2 EV Charger Installation Wilsonville

Stop Planning Around Your Battery — Start Planning Around Your Day

A Level 2 charger adds 25 to 40 miles of range per hour. That means you plug in when you get home, and by the time you’re back in the car the next morning, you’re starting with a full charge — not scrambling to find a working public station before you hit the Boone Bridge backup. For Wilsonville commuters who already deal with one of the more documented congestion points in the Portland metro, that reliability matters.

Wilsonville’s housing stock is split between newer builds in Frog Pond and Villebois — where modern panels often have the capacity to handle EV charging without any additional work — and established neighborhoods like Canyon Creek Estates and Arbor Crossing, where homes built in the late 1980s and early 1990s may need a panel assessment first. The outcome either way is the same: you get an honest answer before any work starts, and the installation fits your home’s actual setup.

There’s also real money available for Wilsonville homeowners through Portland General Electric’s Smart Charging Program. We’re a PGE Approved Contractor, which means we can help you access rebates that most people don’t even know exist — and that most electricians can’t facilitate.

EV Charger Electrician in Wilsonville, OR

Forty Years of Oregon Electrical Work Behind Every Job

We’re a second-generation family business. The current owner is a military veteran who grew up in the trade, and we’ve been doing licensed electrical work across the Portland Metro — including throughout Clackamas County and Wilsonville — for decades. This isn’t a franchise that added EV chargers to their menu last year. It’s a team that has run hundreds of circuits through Oregon garages and knows what it takes to do it right.

We hold Oregon CCB License #178887 and are one of a limited number of Tesla Certified Electrical Contractors in the state. We’re also on the Portland General Electric Approved Contractor list, which is directly relevant to Wilsonville homeowners served by PGE who want to access Smart Charging Program rebates.

With a 4.8 rating across more than 1,400 Google reviews, our track record speaks clearly. Reviewers consistently mention that our electricians showed up on time, explained everything without jargon, and finished the job cleanly. That’s not a coincidence — it’s how we operate.

Home EV Charger Installation Process Wilsonville

What the Installation Actually Looks Like From Start to Finish

It starts with a free estimate. One of our licensed electricians comes out to your Wilsonville home, takes a look at your electrical panel, and gives you a straight answer about what your setup can support. For newer homes in Frog Pond West or Villebois, that conversation is often straightforward — modern 200-amp panels typically have the capacity to add a dedicated EV circuit without major changes. For older homes in Canyon Creek or Barlow, the panel assessment might reveal that a circuit addition is all that’s needed, or it might surface a capacity issue worth addressing. Either way, you know before anything is committed.

Once the scope is clear, we handle the permit. This is worth noting for Wilsonville specifically: electrical permits for properties within city limits — including those in the Washington County portion of the city — are processed through Clackamas County Building Division, not through the City of Wilsonville directly. That’s a detail that trips up less experienced contractors and causes delays. We know the pathway, pull the permit correctly, and coordinate the inspection.

The installation itself is typically completed in a few hours. Our electrician runs the dedicated 240-volt circuit, mounts the charger in your preferred location, and confirms everything is working before they leave. If your charger needs to be mounted on an exterior wall or in a carport — common in some Villebois townhome configurations — we use weatherproof components rated for Oregon’s wet winters. After the county inspection clears, you’re done.

Tesla Charger Installation Wilsonville OR

Every Major Brand, Every Wilsonville Home Configuration

We install all major EV charger brands. If you drive a Tesla, we’re a Tesla Certified Electrical Contractor — one of a select group of Tesla-approved installers in Oregon — and we install the Tesla Wall Connector to Tesla’s own standards. If you drive a Ford F-150 Lightning or Mustang Mach-E, we install the Ford Charge Station Pro. We also work with ChargePoint and other major brands, so whatever you’re driving — whether you picked it up from Wilsonville Chevrolet’s EV hub or ordered it online — one call covers it.

The EV charging station installation includes a panel assessment, a dedicated 240-volt branch circuit, the charger mount, and coordination of the Clackamas County electrical permit and inspection. For homes where the panel needs attention before a new circuit can be safely added, we’ll walk you through what’s actually required — not what’s easiest to sell. Most Wilsonville homes, particularly newer construction in Frog Pond and Villebois, won’t need a full panel upgrade. For older homes in established east-side neighborhoods, the assessment tells you exactly where you stand.

If you’re in PGE’s service territory — which covers Wilsonville — we can connect you to the PGE Smart Charging Program. Standard Level 2 installations may qualify for rebates between $150 and $500, and income-eligible households may qualify for significantly more through PGE+. Free estimates are available, and there’s no pressure to commit before you have all the information you need.

Who handles electrical permits for EV charger installation in Wilsonville, OR?

This is one of the more common points of confusion for Wilsonville homeowners, and it matters because getting it wrong causes real delays. Electrical permits for properties within Wilsonville city limits — including properties in the Washington County portion of the city — are handled by Clackamas County Building Division, not by the City of Wilsonville’s own building department. The county processes permits through their online ePermitting system, and the minimum electrical permit fee runs $120.

We handle the permit application on your behalf. That means you don’t have to figure out which agency to contact, which forms to submit, or how to schedule the inspection afterward. The permit gets pulled correctly the first time, the inspection gets scheduled through the county, and the installation moves forward without unnecessary back-and-forth. For a homeowner who just wants a working charger in their garage, that’s exactly how it should go.

Not necessarily — and this is the question that stops a lot of Wilsonville homeowners from moving forward, because they assume the answer is yes before anyone has actually looked at their panel. The reality is that most homes can support a Level 2 EV charger without a full panel upgrade. The number is closer to 70 to 80 percent of homes nationally, and in Wilsonville’s newer construction zones — Frog Pond West, Villebois, and other builds from the 2000s onward — modern 200-amp panels typically have enough available capacity to add a dedicated EV circuit without any additional panel work.

Where it gets more complicated is in Wilsonville’s older established neighborhoods. Homes in Canyon Creek Estates, Arbor Crossing, and similar east-side developments from the late 1980s and early 1990s sometimes have 100-amp or 150-amp panels that were sized for a different era of household electrical load. A panel assessment will tell you exactly where you stand. If an upgrade is needed, we’ll tell you that honestly — and give you the full picture on cost before anything is scheduled. If it’s not needed, we’ll tell you that too.

Based on current Oregon project data, the average cost of a Level 2 home charger installation in Oregon runs around $1,456. For the broader Portland area — which includes Wilsonville — the typical installed cost range is $1,200 to $2,700 for a standard setup, depending on factors like how far the circuit needs to run from your panel to the charger location, whether conduit is required, and what your existing panel situation looks like.

If a panel upgrade is needed, that adds $1,800 to $4,500 on top of the base installation cost. Permit fees through Clackamas County start at $120 for electrical permits. The good news for Wilsonville homeowners in PGE’s service territory is that rebates through the PGE Smart Charging Program can meaningfully offset these costs — standard Level 2 installations may qualify for $150 to $500 in rebates, and income-eligible households may qualify for more through PGE+. We’re a PGE Approved Contractor and can walk you through what you qualify for before you commit to anything.

Yes. We’re a Tesla Certified Electrical Contractor — one of a limited number of Tesla-approved installers in Oregon. That certification matters specifically for Tesla Wall Connector installations because it means the work is done to Tesla’s own installation standards, not just general electrical code. For Tesla owners in Wilsonville — and given the number of engineers and technology professionals at companies like Siemens Digital Industries Software and FLIR Systems who live here, that’s a meaningful segment of the local EV-owning population — this is often the first thing they check before booking.

Tesla certification is separate from general electrical licensing. Any licensed electrician in Oregon can legally install a Wall Connector, but a Tesla Certified contractor has completed Tesla’s specific training and is recognized by Tesla as a recommended installer. If you want the installation done the way Tesla recommends it — with the right components, the right configuration, and documentation that supports your warranty — working with a certified contractor is the straightforward way to get there. We serve Wilsonville and the broader Portland Metro for Tesla charger installation.

The physical installation itself — running the circuit, mounting the charger, and confirming everything is working — typically takes a few hours on the day of the job. What takes longer is the permit and inspection process, which is handled through Clackamas County for Wilsonville properties. Residential electrical permits at the county level generally clear within one to four weeks, depending on current workload. We manage this process on your behalf, so the timeline isn’t on you to track.

From the time you get your free estimate to the time the charger is installed and inspected, most straightforward residential jobs in the Portland Metro area are completed within a few weeks. Jobs that involve a panel assessment with additional work may take a bit longer depending on what’s needed. If you’re buying a new EV or have one on order and want the charger ready when the car arrives, reaching out early is the easiest way to make sure the timing lines up. We answer the phone directly — no voicemail loop, no automated system — so getting the process started is straightforward.

Oregon requires a licensed electrical contractor and a permit for Level 2 EV charger installation. This isn’t a gray area — it’s state law, and it applies to every property in Wilsonville regardless of whether the home is in the Clackamas County or Washington County portion of the city. A DIY Level 2 installation without a permit and inspection creates real exposure: it can void your homeowner’s insurance coverage, it can affect your EV manufacturer’s warranty, and it leaves you without a legal inspection record if you ever sell the home.

The practical reason to hire a licensed electrician goes beyond compliance. A Level 2 charger draws 32 to 60 amps on a dedicated circuit — that’s a significant load, and it needs to be wired correctly for your specific panel, your home’s existing load, and the charger’s requirements. NEC Article 625 governs EV charger installations specifically, and a licensed electrician who does this work regularly knows those requirements in detail. For Wilsonville homeowners, the permit process runs through Clackamas County Building Division — a step that we handle as part of the job, so you’re not navigating it alone.